Angular Fittings
Angular fittings for UniStrut are commonly used to connect two sections of UniStrut at an angle. These fittings typically have a 90-degree angle, but they can also be found in other angles such as 45- degree or 30-degree.
Product Details
Product Overview
◆ Material: Electro – Galvanized Steel, Hot – dip galvanized steel
Product Details
Angular fittings for UniStrut are commonly used to connect two sections of UniStrut at an angle. These fittings typically have a 90-degree angle, but they can also be found in other angles such as 45- degree or 30-degree. Angular fittings are often used in applications such as framing, supports, and structures where UniStrut is used as the building block. They provide a secure and stable connection between two sections of UniStrut, allowing for the creation of complex and customized structures.
Reference and Packing
|
Angular Fittings for Unistrut / Strut Channel / C – Channel CVL® |
||
|
Product Code (***) |
A |
B |
|
CVL1130 |
168 mm |
102 mm |
|
CVL1131 |
219 mm |
152 mm |
|
Angular Fittings for Unistrut / Strut Channel / C – Channel CVL® |
||||
|
Product Code (***) |
Hole & Slot Width (mm) |
Hole Spacing (mm) |
Width (mm) |
Thickness (mm) |
|
CVL1068 |
14 |
20.5mm
from the beginning
48mm
from the middle |
40 or 41 |
5÷6 |
|
CVL1026 |
14 |
40 or 41 |
5÷6 |
|
|
CVL1326 |
14 |
40 or 41 |
5÷6 |
|
|
CVL1325 |
14 |
40 or 41 |
5÷6 |
|
|
CVL1749 |
14 |
40 or 41 |
5÷6 |
|
|
CVL1747 |
14 |
40 or 41 |
5÷6 |
|
|
CVL1359 |
14 |
40 or 41 |
5÷6 |
|
|
Angular Fittings for Unistrut / Strut Channel / C – Channel CVL® |
||||
|
Product Code (***) |
Hole & Slot Width (mm) |
Hole Spacing (mm) |
Width (mm) |
Thickness (mm) |
|
CVL1713 |
14 |
20.5mm
from the beginning
48mm
from the middle |
40 / 41 |
5÷6 |
|
CVL1186-45° |
14 |
40 / 41 |
5÷6 |
|
|
CVL1546-45° |
14 |
40 / 41 |
5÷6 |
|
|
CVL1033 |
14 |
40 / 41 |
5÷6 |
|
|
CVL1035 |
14 |
40 / 41 |
5÷6 |
|
|
CVL1034 |
14 |
40 / 41 |
5÷6 |
|
|
CVL1331 |
14 |
40 / 41 |
5÷6 |
|
|
CVL1332 |
14 |
40 / 41 |
5÷6 |
|
(***) The product code details will be based on the quotation sheet.