Flexible Metal Conduit
Flexible Metal Conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces. The Flexible Metal Conduit stays in position after bending but it’s not intended for repeated bending. It does not hold a bend permanently as a bent non-flex conduit would.
Product Overview
◆ Standard: BS 731 (British standard)
◆ Material: Hot-dip galvanized steel
Product Details
Flexible Metal Conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces. The Flexible Metal Conduit stays in position after bending, but it’s not intended for repeated bending. It does not hold a bend permanently as a bent non-flex conduit would.
For areas where obstacles would require rigid conduits to make too many turns and use an impractical number of fittings, flexible metal conduits may be an ideal choice. A flexible electrical conduit is widely used to hook up motors and light fixtures because it can provide vibration isolation.
The galvanized flexible conduit is available in trade sizes 1/2” through 2”.
Reference and Packing
|
Flexible Metallic Conduit CVL®
Manufactured according to BS 731 (British Standard) |
|||||||
|
Product Code CVL®
|
Size (inch)
|
Inside Diameter (mm)
|
Outside Diameter (mm)
|
Rool (m) (*)
|
|||
|
Min |
Max |
Min |
Max |
||||
|
OMO12CVL |
1/2 |
15.88 |
16.38 |
19.20 |
19.70 |
50 |
|
|
OMO34CVL |
3/4 |
20.62 |
21.21 |
24.30 |
25.10 |
50 |
|
|
OMO100CVL |
1 |
25.40 |
26.42 |
30.00 |
31.00 |
50 |
|
|
OMO114CVL |
1 1/4 |
31.75 |
34.5 |
38.00 |
40.30 |
25 |
|
|
OMO112CVL |
1 1/2 |
38.10 |
40.01 |
45.00 |
48.80 |
25 |
|
|
OMO200CVL |
2 |
50.80 |
52.83 |
56.50 |
57.10 |
10 |
|
(*) The length of each roll can vary according to each batch