Double Cantilever Arm
Double cantilever arms for unistrut are typically used to support heavier loads or when additional support is needed at the end of a cantilever arm. These arms are designed to attach to a unistrut channel and extend out horizontally to support equipment, such as conduits, or cable trays.
Product Details
Product Overview
◆ Standard: BS 6946 – TCCS 01:2020/CVL, Safe load test QUATEST 3 according to the maximum load chart.
◆ Material: Hot – dip galvanized steel
◆ Thickness: 1.5 mm, 2.0 mm, 2.5 mm, 2.6 mm
Product Details
Double cantilever arms for unistrut are typically used to support heavier loads or when additional support is needed at the end of a cantilever arm. These arms are designed to attach to a unistrut channel and extend out horizontally to support equipment, such as conduits, or cable trays. The double cantilever design provides greater stability and weight capacity, allowing for larger loads to be supported without bending or sagging. Double cantilever arms can be adjusted or customized to fit specific project requirements.
Reference and Packing
|
Double Cantilever Arm CVL®
|
||
|
Product code
(Slotted Unistrut)
41 x 21 x 2mm/2.5mm |
Product code
(Slotted Unistrut)
41 x 41 x 2mm/2.5mm |
Length of Cantilever Arm (mm) |
|
TDD21150NN |
TDD41150NN |
150 |
|
TDD21200NN |
TDD41200NN |
200 |
|
TDD21250NN |
TDD41250NN |
250 |
|
TDD21300NN |
TDD41300NN |
300 |
|
TDD21400NN |
TDD41400NN |
400 |
|
TDD21450NN |
TDD41450NN |
450 |
|
TDD21550NN |
TDD41550NN |
550 |
|
TDD21600NN |
TDD41600NN |
600 |
|
TDD21650NN |
TDD41650NN |
650 |
|
TDD21700NN |
TDD41700NN |
700 |
|
TDD21750NN |
TDD41750NN |
750 |