1. Wire Mesh Cable Tray Accessories And Support Systems
Cat Van Loi provides a complete range of wire mesh cable tray accessories and support systems.
- The CSB (Corner Strength Bar) reinforces tray corners during installation.
- The FLK (Fastlock) provides fast and secure locking between tray sections.
- The THR (50 Tray Holder) is used to hold and support the tray from above.
- The HKS (Hanging Hooks) enables overhead suspension of the wire mesh cable tray.
- The HDC (Hold Down Clip for U-Channel) secures the tray to U-channel supports.
- The CHD (Central Hold Down Clip) provides central hold-down fixing for the tray.
- The BTC (Boltless Coupler) joins tray sections without bolts for quick installation.
- The MBR (M Shape Bar) provides structural support across a range of tray widths from 100 mm to 900 mm.
- The FHB (Flag Type Hanging Bracket) is used for overhead suspension from structural elements.
- The UFS (Under Floor Stand) supports the tray from below floor level.
- The THD (Tray Hold Down) secures the tray in position.
- The CTS (Cabinet Top Stand) provides support for wire mesh cable tray on top of cabinets.
- The BR (100 – 900) (Bar) serves as a structural support bar for tray widths from 100 mm to 900 mm.
- The PBD (Pipe Board) is used for mounting the tray to pipe or board surfaces.
- The CCSB (Copper Coated Split Bolt) is used for grounding and bonding connections within the wire mesh cable tray system.
- The SPB (Spider Bracket) and CM50 provide multi-directional support for wire mesh cable tray installations.
- The LWB (L-Type Wall Bracket) is used for wall-mounting the tray in an L-shaped configuration.
- The CWB (Cantilever Wall Bracket) provides cantilever support from wall surfaces.
- The WBK (Wall Bracket) is a standard wall-mounting bracket for the wire mesh cable tray.
- The CGD (Cable Guider) guides cables entering or exiting the tray.
- The DVR (Divider) separates different cable runs within the same tray.
- The CVR (Cover) provides a protective cover over the wire mesh cable tray.
