Conduit Elbow 45°
A conduit elbow 45° is a type of fitting used in electrical installations to change the direction of a conduit run by 45 degrees. It is specifically designed for use with electrical conduit systems.
Product Details
Product Overview
- Standard: UL 514B / ANSI / NEMA FB 1
- Material: Pre – galvanized steel, Hot – dip galvanized steel, Stainless steel SUS304
Product Details
Conduit elbows are used when the straight path of a conduit needs to be altered to navigate around obstacles or to achieve a desired routing of the electrical wiring. A 45° conduit elbow is used when a moderate change in direction is needed. It has two openings at each end that are compatible with the corresponding size of conduit. The elbow is designed to be installed by inserted and secured using a locking mechanism, such as set screws or compression fittings. The 45° angle of the conduit elbow allows for a smooth transition in direction while maintaining the integrity of the conduit system. It helps to minimize sharp bends and stress on the wiring inside the conduit, ensuring proper wire protection and reducing the risk of damage or strain.Reference and Packing
|
Conduit Elbow 45° CVL® |
|||||
|
Size (inch) |
Product Code
Using for Steel Conduit
Product Code |
Product Code
Using for Rigid Conduit
Product Code |
|||
|
JIS Type E |
EMT UL 797 |
JIS Type C |
BS31/BS4568(**) |
IMC – UL1242
(*)RSC – UL6 |
|
|
1/2 |
COLE19 |
ACOLE12 |
COLC19 |
BCOLC19/20 |
(*)ACOLC12 |
|
3/4 |
COLE25 |
ACOLE34 |
COLC25 |
BCOLC25 |
(*)ACOLC34 |
|
1 |
COLE31 |
ACOLE100 |
COLC31 |
BCOLC32 |
(*)ACOLC100 |
|
1 1/4 |
COLE39 |
ACOLE114 |
COLC39 |
BCOLC38 |
(*)ACOLC114 |
|
1 1/2 |
COLE51 |
ACOLE112 |
COLC51 |
BCOLC50 |
(*)ACOLC112 |
|
2 |
COLE63 |
ACOLE200 |
COLC63 |
|
(*)ACOLC200 |
|
2 1/2 |
COLE75 |
|
COLC75 |
|
(*)ACOLC212 |
|
3 |
(*)ACOLC300 |
||||
|
4 |
(*)ACOLC400 |
||||
(*) The product code used for RSC steel conduit fitting is changed from “A” to “R”.
(**) Using for BS 31: Size of conduit is 19mm.
Using for BS 4568: Size of conduit is 20mm.