Previous image
Next image
Conduit Elbow 90°
A Conduit Elbow 90° is a type of fitting used in electrical installations to change the direction of a conduit system by 90 degrees. It is designed to connect two sections of conduit at a right angle, allowing the conduit run to make a turn or bend.
Product Details
Product Overview
- Standard: UL 514B / ANSI / NEMA FB 1
- Material: Electro – galvanized steel, Hot – dip galvanized steel, Stainless steel SUS304
Product Details
The conduit elbow 90° is typically made of metal, such as steel and is available in various sizes to match the diameter of the conduit being used. It has two openings, where the sections of conduit can be inserted and secured using a locking mechanism, such as set screws or compression fittings. The purpose of a conduit elbow 90° is to provide a smooth and gradual change in direction for the conduit system. This allows electrical wiring to be routed around corners, obstacles, or walls while maintaining the integrity and continuity of the conduit run. The 90-degree angle ensures that the conduit system follows the desired path, facilitating the installation of electrical cables and maintaining proper cable management.Reference and Packing
Conduit Elbow 90° CVL® |
||||||
Size (inch) |
Product Code
Using for Steel Conduit
Product Code (***) |
Product Code
Using for Rigid Conduit
Product Code (***) |
||||
JIS Type E |
EMT – UL 797
(With screw) |
EMT – UL 797
(No screw) |
JIS Type C |
BS31/BS4568
(**) |
IMC – UL 1242
(*) RSC – UL 6
|
|
1/2 |
COE19 |
ACOE12 |
ACO2E12 |
COC19 |
BCOC19/20 |
(*)ACOC12 |
3/4 |
COE25 |
ACOE34 |
ACO2E34 |
COC25 |
BCOC25 |
(*)ACOC34 |
1 |
COE31 |
ACOE100 |
ACO2E100 |
COC31 |
BCOC32 |
(*)ACOC100 |
1 1/4 |
COE39 |
ACOE114 |
ACO2E114 |
COC39 |
BCOC38 |
(*)ACOC114 |
1 1/2 |
COE51 |
ACOE112 |
ACO2E112 |
COC51 |
BCOC50 |
(*)ACOC112 |
2 |
COE63 |
ACOE200 |
ACO2E200 |
COC63 |
|
(*)ACOC200 |
2 1/2 |
COE75 |
ACOE212
|
ACO2E212 |
COC75 |
|
(*)ACOC212 |
3 |
|
ACOE300 |
ACO2E300 |
|
|
(*)ACOC300 |
4 |
|
ACOE400 |
ACO2E400 |
|
|
(*)ACOC400 |
5 |
(*)ACOC500 |
|||||
6 |
(*)ACOC600 |
(*) The product code used for RSC steel conduit fitting is changed from “A” to “R”.
(**) Using for BS 31: Size of conduit is 19mm.
Using for BS 4568: Size of conduit is 20mm.
(***) Hot dip galvanizing product code = Electro Galvanized steel product code + NN